Single End Tire Cords

We manufacture Single end tire cords made of a variety of synthetic yarns such as nylon, polyester, aramid and rayon. These yarns are twisted into single or multiple-ply cords and later cured to the required adhesion and physical properties required by the customer. Single end tire cords have High breaking tenacity with low elongation and creep for excellent driving stability. 

The tire cords are RFL coated for superior adhesion to the rubber substrate. Our proprietary dip solutions provide an excellent adhesion of the yarn to various kinds of rubber substrates including NR, CR, SBR, CSM, EPDM etc.

We can also manufacture hybrid single end tire cords with the most popular being a hybrid of Aramid and Nylon66. This cord has a high strength to weight ratio which improves fuel efficiency and is capable of withstanding high temperatures reached by performance tires. Polyester tire cords are manufactured using high modulus low shrinkage yarns to ensure better dimensional stability during operation.  

Write to us at marketing@indtextile.com for more information.

Single end tire cord.png
application-2.jpg
Single end cord.jpg

Parameters

Remark

RAW Materials

Polyester, Aramid, Nylon, Rayon

Other specific raw materials can be utilised if required by the customer

Linear mass density (Denier)

3000-59,400

Cords of higher or Lower deniers can be produced as per requirement.

Construction

1×3, 2×3, 2×5, 3×3, 5×3, 6×3, 5×4, 9×3, 3x4x3, 9×5, 9×6 (Hight twist possible)

Customisable as per requirement

Stiffness & Finish

Ultra-soft, soft, semi-stiff, stiff, superior stiff

Customisable as per requirement

Dip Solution Compatibility

EPDM, NR, CR, CSM, SBR

Solutions of particular chemical compostions/soild concentrations can be prepared, as per customer

Physical Properties

Breaking Strength, Elongation, EASL, Free Heat Shrinkage, Adhesion, Cord Gauge, Weight/meter

Our dipped cords match all these specifications given by our customers

Packing

Metal bobbins, 8-13 kgs per bobbin, Cardboard tubes, 0.8 – 10 kgs per tube.

Can be parallel wound on flat or conical tubes of dimensions specified by the customer

dipped_cords.png