Dipped Cords
Single End Dipped cords made of Polyester & Aramid yarns can be manufactured in various constructions and finishes. Our cords are made of High Modulus & Low Shrinkage yarns to ensure the power transmission belts maintain their dimensional stability over prolonged periods of time. Our proprietary dip solutions provide an excellent adhesion of the yarn to various kinds of rubber substrates including NR, CR, SBR, CSM, EPDM etc. Write to us at marketing@indtextile.com for more information.
Parameters
Remark
RAW Materials
Polyester, Aramid
Other specific raw materials can be utilised if required by the customer
Linear mass density (Denier)
3000-59,400
Cords of higher or Lower deniers can be produced as per requirement.
Construction
1×3, 2×3, 2×5, 3×3, 5×3, 6×3, 5×4, 9×3, 3x4x3, 9×5, 9×6
Customisable as per requirement
Stiffness & Finish
Ultra-soft, soft, semi-stiff, stiff, superior stiff
Customisable as per requirement
Dip Solution Compatibility
EPDM, NR, CR, CSM, SBR
Solutions of particular chemical compostions/soild concentrations can be prepared, as per customer
Physical Properties
Breaking Strength, Elongation, EASL, Free Heat Shrinkage, Adhesion, Cord Gauge, Weight/meter
Our dipped cords match all these specifications given by our customers
Packing
Metal bobbins, 8-13 kgs per bobbin, Cardboard tubes, 0.8 – 10 kgs per tube.
Can be parallel wound on flat or conical tubes of dimensions specified by the customer
Applications
Power Transmission Belts
Air-springs
Timing Belts
